Heat Shrinkable Cable End Cap - KABLO-ISIYLA-DARALAN-KABLO-UC-KAPAGI

Home / Cables / Wire and Cable

T/T, L/C, D/P, etc.

20 days

China

By Sea

Shanghai, China

3926909090

Carton box, or according to

client’s requirement

Heat Shrinkable Cable End Cap (HSEC) offers an economical means of sealing the end of power cable with a completely watertight seal. The internal surface of the end cap has a layer of spiral coated hot melt adhesive, which retains its flexible properties after recovery. Heat Shrinkable Cable End Cap, HSEC is recommended for application both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths. These caps are thermos-shrinkable, they are placed at the beginning and the end of the cable to protect the cable from water infiltration or other sources of contamination.

Model. No As supplied (mm) After recovered (mm) Cable diameter(mm) D(Min) D(Max.) A(±10%) L(±10%) Dw(±5%) Standard length end caps EC-12/4 12 4 15 40 2.6 4-10 EC-14/5 14 5 18 45 2.2 5-12 EC-20/6 20 6 25 55 2.8 6-16 EC-25/8.5 25 8.5 30 68 2.8 10-20 EC-35/16 35 16 35 83 3.3 17 -30 EC-40/15 40 15 40 83 3.3 18- 32 EC-55/26 55 26 50 103 3.5 28 48 EC-75/36 75 36 55 120 4 45 -68 EC-100/52 100 52 70 140 4 55 -90 EC-120/60 120 60 70 150 4 65-110 EC-145/60 145 60 70 150 4 70-130 EC-160/82 160 82 70 150 4 90-150 EC-200/90 200 90 70 160 4.2 100-180 Extended Length end cap K  EC110L-14/5 14 5 30 55 2.2 5-12 K  EC130L-42/15 42 15 40 110 3.3 18 – 34 K  EC140L-55/23 55 23 70 140 3.8 25 -48 K  EC145L-62/23 62 23 70 140 3.8 25 -55 K  EC150L-75/32 75 32 70 150 4 40 -68 K  EEC150L-75/36 75 36 70 170 4.2 45 -68 K  EC160L-105/45 105 45 65 150 4 50 -90

1) The product shall be kept in a clean, dry and ventilated warehouse.
2) The product should not be stacked together with flammable products and should not be close to fire sources.
3) The product should avoid direct sunlight and rain.
4) The product should be packed completely to avoid moisture and pollution.
5) The storage period of the product at ordinary temperature is 12 months from the date of production. More than 12 months, the product should be re-examined and only used after passing the inspection.